Search results for " Energy System"

showing 10 items of 34 documents

Simulation of photovoltaic installation connected to the grid with storage system

2017

Abstract In the present paper, a new approach for the management of energy resources in a research laboratory is proposed and evaluated. A simulation study for the photovoltaic (PV) installation was conducted under the Tunisian-Italian cooperation project DE.DU.ENER.T, using renewable energy and economic criteria. The aim of the study is to improve the energy efficiency in order to minimize the electricity cost consumed in the laboratory. A Hybrid Renewable Energy System consisting of a photovoltaic field of 12KWc was installed to reduce the exorbitant bills, due to intensive energy equipment such as drying ovens and workstations, using sustainable, green and clean sources. In addition, a s…

Computer science020209 energy02 engineering and technologyAutomotive engineering0202 electrical engineering electronic engineering information engineering0601 history and archaeologyRenewable EnergyHeat Transfer; Hybrid Energy System; Photovoltaic panel; Renewable Energy; Simulation; Energy (all)060102 archaeologybusiness.industryPhotovoltaic systemPhotovoltaic panel06 humanities and the artsGridHeat TransferSizingRenewable energySettore ING-IND/33 - Sistemi Elettrici Per L'EnergiaHybrid Energy SystemElectricity generationEnergy (all)Computer data storagebusinessEnergy (signal processing)SimulationEfficient energy use
researchProduct

Modeling and design of Net ZEBs as integrated energy systems

2015

Net-zero energy buildings (Net ZEBs) are emerging as a quantifiable design concept and a promising solution to minimizing the environmental impact of buildings. This is the main concept that is focused on this chapter with emphasis on dynamic modeling and examples of technological approaches to achieve net-zero energy. Appropriate modeling of building-integrated solar energy systems is essential for the design of Net ZEBs and the study of optimal control strategies. The net-zero energy balance may be achieved through a combination of passive and active solar technologies, heat pumps, combined heat and power, and energy efficiency measures to reduce energy consumption for lighting and applia…

Computer scienceModelingSystems engineeringNet (polyhedron)Modeling and designdesign Net Zero energy buildings energy systemsCivil engineeringEnergy (signal processing)System dynamicsEfficient energy use
researchProduct

Results of a literature review on methods for estimating buildings energy demand at district level

2019

Abstract In the framework of distributed energy planning, evaluating reliable energy profiles of different sectors has a prominent role. At the same time, it is a quite challenging task, since the availability of actual energy profiles of buildings at the district level is not widespread. A survey of over 70 studies in scientific literature has been accomplished and a set of criteria has been defined for classifying the selected contributions based on the energy demand data features, source and/or estimation methods, highlighting the ones adopting hourly energy profiles. As final results, tables summarizing the main methods characteristics and a selection of studies providing directly useab…

Distributed energy systemComputer scienceUrban energy profiles estimation methodsBuildings hourly energy consumption020209 energyDistributed energy systems02 engineering and technologyScientific literatureBuildings hourly energy consumptionsIndustrial and Manufacturing EngineeringTask (project management)Urban energy profiles estimation methodTransport engineeringSet (abstract data type)Buildings hourly energy consumptions; Distributed energy systems; Urban district energy demand estimation; Urban district energy planning; Urban energy profiles estimation methods; Civil and Structural Engineering; Building and Construction; Pollution; Mechanical Engineering; Industrial and Manufacturing Engineering; Electrical and Electronic Engineering020401 chemical engineering0202 electrical engineering electronic engineering information engineering0204 chemical engineeringElectrical and Electronic EngineeringCivil and Structural EngineeringUrban district energy planningSettore ING-IND/11 - Fisica Tecnica AmbientaleEnergy demandbusiness.industryMechanical EngineeringBuilding and ConstructionEnergy planningPollutionGeneral EnergyDistributed generationUrban district energy demand estimationbusinessEnergy (signal processing)Level of detail
researchProduct

Energy and environmental benefits in public buildings as a result of retrofit actions

2011

Abstract The paper presents the results of an energy and environmental assessment of a set of retrofit actions implemented in the framework of the EU Project “BRITA in PuBs” (Bringing Retrofit Innovation to Application in Public Buildings – no: TREN/04/FP6EN/S07.31038/503135). Outcomes arise from a life cycle approach focused on the following issues: (i) construction materials and components used during retrofits; (ii) main components of conventional and renewable energy systems; (iii) impacts related to the building construction, for the different elements and the whole building. The results are presented according to the data format of the Environmental Product Declaration. Synthetic indi…

EngineeringArchitectural engineeringSettore ING-IND/11 - Fisica Tecnica AmbientaleRenewable Energy Sustainability and the Environmentbusiness.industryCivil engineeringSet (abstract data type)BRITALife cycle approachBuilding retrofitEnergy Environmental assessmentData formatRenewable energy systemReturn ratioEnvironmental impact assessmentbusinessEnergy (signal processing)Environmental product declarationBuilding constructionRenewable and Sustainable Energy Reviews
researchProduct

A Banki–Michell turbine for in-line water supply systems

2017

The design of a novel Banki-Michell type turbine, to be located in existing water pipelines, is proposed. The turbine has a very efficient diffuser which allows the turbine to be compact and, most important, to have in-line flanges for minimal piping modifications at existing sites. This turbine combines a simple geometry with stable efficiency in a wide range of water discharges. The design procedure estimates the outer diameter of the impeller, its width and the geometry of the diffuser. A series of experimental tests has been carried out to measure the efficiency of the proposed turbine prototype. The turbine was tested in two different configurations, with and without rotational velocit…

EngineeringCross-Flow turbine0208 environmental biotechnologyWater supply02 engineering and technology010501 environmental sciences01 natural sciencesTurbineSettore ICAR/01 - IdraulicaHydraulic machineryDiffuser (sewage)0105 earth and related environmental sciencesWater Science and TechnologyCivil and Structural Engineeringbusiness.industryinline turbinehydraulic machinery designhydraulics of renewable energy systems.Line (electrical engineering)020801 environmental engineeringRenewable energyPipeline transportBanki-Michell turbineCross-flow turbinebusinessMarine engineeringJournal of Hydraulic Research
researchProduct

Addressing the main challenges of energy security in the twenty-first century – Contributions of the conferences on Sustainable Development of Energy…

2016

Abstract Climate change and fossil fuel reserve depletion both pose challenges for energy security and for wellbeing in general. The top ten among them include: Decarbonising the world economy; Enhancing the energy efficiency and energy savings in buildings; Advancing the energy technologies; Moving towards energy systems based on variable renewables; Electrifying the transport and some industrial processes; Liberalizing and extending the energy markets; Integrating energy sectors to Smart Energy Systems; Making the cities and communities smart; Diversifying the energy sources; and Building more biorefineries. Presenting the contributions of selected conference papers published in the speci…

EngineeringEnergy management020209 energyRenewable energy sourceEnergy security02 engineering and technologyEnergy engineeringIndustrial and Manufacturing EngineeringEnergy policyRenewable energy sources020401 chemical engineeringSettore ING-IND/10 - Fisica Tecnica Industriale0202 electrical engineering electronic engineering information engineering0204 chemical engineeringElectrical and Electronic EngineeringCivil and Structural EngineeringSustainable developmentSDEWESbusiness.industrySmart energy systemMechanical EngineeringSmart energy systemsEnvironmental resource managementEnergy security ; Decrabonization ; Renewable energy sources ; Energy efficiency ; Smart energy systems ; SDEWESBuilding and ConstructionEnergy securityEnvironmental economicsPollutionEnergy conservationGeneral EnergyEnergy efficiencyDecrabonizationbusinessEnergy sourceEfficient energy use
researchProduct

Achieving maximum power transfer in a multi-source renewable system

2014

In this paper, a multi-source DC-DC power system is proposed for renewable applications. A multi-input, single inductor power converter controlled by two interacting control loops is designed. The steady-state and small-signal analysis of the designed system is carried out. A battery-photovoltaic system is designed as an application example. Both the output voltage and maximum power point of solar panels are properly controlled to achieve high performances of the whole system. Experimental results on a 48 V laboratory prototype are presented to discuss system performances.

EngineeringMulti-input converterMaximum power principlebusiness.industryRenewable energy sourcePower converterInductorPower (physics)Renewable energyRenewable energy systemsElectric power systemElectronic engineeringMaximum power transfer theoremPoint (geometry)businessVoltagePower system
researchProduct

Design and control of a novel multi-source renewable energy system

2014

In this paper, a novel multi-input, single-inductor architecture is proposed. An innovative hysteretic control strategy of both the output voltage and the sources operating point control is designed and tested. Benefits brought by the proposed architecture over existing solutions are widely investigated. As an example, the design of a 48 V dual input system which is fed by photovoltaic and thermo-electric generators is proposed. Design guidelines are given and simulation results are presented to test the efficiency of the proposed architecture.

EngineeringOperating pointbusiness.industryPhotovoltaic systemControl (management)photovoltaic arrayControl engineeringSettore ING-IND/32 - Convertitori Macchine E Azionamenti ElettriciDual (category theory)fuel cellRenewable energy systemElectronic engineeringmulti-source energy systemArchitecturebusinessrenewable energy sourcesMulti-sourceVoltage
researchProduct

The Energy System of Sicilian Region, Italy: 2014 situation and evolutionary trends

2015

The development of reliable energy scenarios are become increasingly more important and crucial due to scientific interest but also because it is essential for the deployment of effective energy policies in the territory. The depletion of Fossil Fuels and the need for the most industrialized countries to achieve the target of a sustainable development have induced important national, European and global initiatives. These actions have led to major changes on each energy system of countries and regions, contributing to the evolution of new local energy systems. In this paper, the Authors have collected, processed and analyzed the data concerning the evolution and changes of the Sicilian ener…

EngineeringSettore ING-IND/11 - Fisica Tecnica Ambientalebusiness.industryEnvironmental resource managementEnvironmental impact of the energy industryenergy dataEnergy policy2020 targetEnergy conservationEnergy developmentRenewable energy creditClimate change mitigationEnergy subsidiesRenewable energy SorceSettore ING-IND/10 - Fisica Tecnica IndustrialeSiclian Energy systembusinessFeed-in tariffEnvironmental planning
researchProduct

Mini Wind Plant to Power Telecommunication Systems: A Case Study in Sicily

2012

The ever increasing problems related to air pollution and the difficulties for power lines to reach inaccessible areas are pushing to find new solutions for powering telecommunications equipments (TLC). The renewable energy systems, although relatively expensive, have the required characteristics. The purpose of this work is to find a solution based on a low power wind turbine to serve a real telecommunication site located near Palermo, the main city of Sicily (Italy).

EngineeringWind powerbusiness.industryGeneral EngineeringAir pollutionmedicine.disease_causeTurbineCivil engineeringPower (physics)Electric power transmissionWork (electrical)Renewable energy systemmedicinebusinessTelecommunicationsAdvanced Materials Research
researchProduct